About AgOilPress

Cold Press

The AgOilPress is a precision cold screw press. It is engineered to mechanically extract the most possible oil without producing high temperatures. The oil and meal under normal operation does not exceed 130°F (54°C). Typical oil extraction efficiencies run 82% to as high as 90% oil extraction. Because of the low temperature extraction, the nutrition in the oil and press meal is perfectly preserved.

Continuous Operation

The AgOilPress is engineered to be set up and ran continuously 24 hours a day without any other intervention. As long as clean commodity is automatically feed to the AgOilPress, the machine will run without cease.

The press requires 240V single phase input and draws only 4-6 amps under normal operation. Three phase power can also be used to power the press if it is available.

The press motor has a variable speed controller to accurately set the rate at which the press runs. The slower you run the machine, the more oil will be extracted.

Quantities

The M-70 oil press will produce 50 to 70 gallons (190 to 260 Liters) of cold pressed oil per day running 24 hrs from oil seed crops and nuts. The press will process 700 to 1500 lbs (320 to 680 Kilograms) of oil seed or nuts per day providing 450 to 900 lbs (200 to 400 Kilograms) of high protein, high nutrition low fat press meal.

Soybeans typically contain 18% oil by volume. Because of the low oil content in soybeans, you will get 15 to 20 gallons (56 to 75 Liters) of oil and 600 to 800 lbs (270 to 360 Kilograms) of high protein press meal per day running 24 hours.

If you are seeking greater processing volumes, we simply line them up in a row, as many as needed, to produce your achievements. Much like an engine, which is better, one large piston/cylinder or several pistons/cylinders?

Warranty

The AgOilPress is manufactured in the USA. The AgOilPress comes with a one year warranty against parts breakage. Spare parts are readily available. There is no warranty for parts wearing due to dirt and debris being ran through the press.

Shipping

We have many presses in stock ready to be assembled and shipped. Lead time to ship is less than two weeks from time of cleared payment. Please email your address/location and we can quote shipping.

Shipping to all 48 states and Canada $300.

International Shipping

Contact Marnie Bringas for quote to ship unit to all other countries. Her contact data:

Marnie Bringas
Trans Continental Cargo, Inc.
8530 N.W. 72 Street
Miami, Florida 33166
Email: tccmarnie@bellsouth.net
Phone: 305-592-5877
Fax: 305-592-9918